laisser un message : cxxcxm@chinaxinxingexim.com
Téléphone : +86 15880201125
The Integrated Anti-UAV System is designed to detect, identify, track, and respond to unauthorized unmanned aerial vehicles (UAVs). By integrating radar detection, RF monitoring, EO/IR surveillance, electronic countermeasures, and laser-based neutralization, the system provides multi-layer aerial monitoring and protection.
With 360° airspace surveillance and integrated command and control, it is suitable for airports, critical infrastructure, perimeter protection, and other high-security facilities.
Two configurations are available to meet different operational requirements: System-I and System-II.
360° Airspace Monitoring: Provides continuous aerial surveillance and target detection.
Multi-Sensor Detection: Integrates radar, RF monitoring, and EO/IR technologies.
Automatic Target Tracking: Supports target capture, identification, tracking, and radar-linked surveillance.
Electronic Countermeasures: Supports communication and navigation signal interference or deception.
Laser-Based Neutralization: Provides precision laser engagement against selected aerial targets.
Integrated Command and Control: Combines multiple detection and response modules into one coordinated system.
System-I integrates RF detection, Ku-band radar, EO/IR tracking, deception jamming, and laser-based neutralization.
1. RF Detection Module
| Parameter | Specification |
|---|---|
| Monitoring and Identification Frequency | 20 MHz–6000 MHz |
| Direction-Finding Frequency | 300 MHz–6000 MHz |
| Detection Range | Greater than 10 km |
| Monitoring Bandwidth | Greater than 120 MHz |
| Direction-Finding Accuracy | Less than 2° |
| Panoramic RF Scanning Time | Less than 3 seconds |
| Simultaneous Target Discovery | More than 30 batches |
| Identification Accuracy | Greater than 95% |
| False Alarm Rate | Less than 2% |
| Protection Rating | IP66 |
| Weight | Less than 25 kg |
2. Radar Detection Module
| Parameter | Specification |
|---|---|
| Operating Band | Ku-band |
| Detection Range | Greater than 6 km |
| Azimuth Coverage | 360° |
| Pitch Coverage | Greater than 60° |
| Target Speed | 1–150 m/s |
| Distance Accuracy | Less than 5 m |
| Angular Accuracy | Less than 0.3° |
| Simultaneous Target Capacity | More than 500 |
| Operating Temperature | -40°C to +65°C |
| Protection Rating | IP66 |
| Data Interface | UDP |
3. EO/IR Surveillance Module
| Parameter | Specification |
|---|---|
| Visible Camera Resolution | 2688 × 1520 |
| Visible Lens | 12.5–775 mm |
| Visible Tracking Range | 5000 m |
| Visible Identification Range | 3000 m |
| Thermal Detector | Cooled MCT |
| Thermal Resolution | 640 × 512 |
| Thermal NETD | 20 mK |
| Thermal Lens | 90–1100 mm continuous zoom |
| Thermal Tracking Range | 5000 m |
| Thermal Identification Range | 3000 m |
| Horizontal Pan Speed | 0.01–100°/s |
| Pitch Speed | 0.01–80°/s |
| Weight | Less than 110 kg |
Thermal detection and identification distances are specified for a 0.3 m × 0.3 m UAV target.
4. Deception Jamming Module
| Parameter | Specification |
|---|---|
| Communication Link Interference Range | 10 km |
| Navigation Link Interference/Deception Range | 10 km |
| Operating Frequency | 200–6000 MHz |
| Supported Navigation Signals | GPS-L1CA, GLONASS-R1, BDS-BII, Galileo-E1 |
| Power per Channel | 50–100 W |
| Maximum Channels | 13 |
| Azimuth Coverage | 0–360° |
| Elevation Coverage | 0–70° |
| Response Time | Less than 3 seconds |
| Dimensions | Less than 950 × 500 × 1000 mm |
| Weight | Less than 85 kg |
| Peak Power Consumption | Less than 2500 W |
5. Laser Neutralization Module
| Parameter | Specification |
|---|---|
| Laser Output Power | 5 kW |
| Effective Damage Distance | ≥800 m |
| Damage Time | 9–15 seconds |
| Tracking Accuracy | Less than 15 μrad RMS |
| Ranging Distance | ≥1.5 km |
System-II combines X-band radar, RF detection, EO/IR surveillance, and laser-based neutralization in an integrated configuration.
1. Radar Detection Module
| Parameter | Specification |
|---|---|
| Operating Frequency | 10.4–10.6 GHz |
| Detection Range – DJI Phantom 4 | ≥5 km |
| Detection Range – Personnel | ≥8 km |
| Detection Range – Vehicles | ≥10 km |
| Refresh Rate | 2 seconds |
| Target Capacity | ≥200 |
| Target Speed | 1–100 m/s |
| Azimuth Coverage | 360° |
| Pitch Coverage | -5° to +30° |
| Detection Altitude | 800 m |
| RMS Azimuth/Pitch Accuracy | Less than 0.4° |
| Distance Accuracy | Less than 5 m |
| Data Interface | UDP |
| Power Supply | AC 220 V / 50 Hz |
| Operating Temperature | -40°C to +55°C |
| Weight | Less than 20 kg (excluding tripod) |
2. EO/IR Surveillance Module
| Parameter | Specification |
|---|---|
| Visible Camera | 2 MP HD CMOS |
| Visible Lens | 8–500 mm |
| Visible Tracking Range | Approximately 2000 m |
| Visible Identification Range | ≥1500 m |
| Thermal Detector | VOx, 640 × 512 |
| Thermal Lens | 31–155 mm |
| Thermal Optical Zoom | 5× |
| Thermal Tracking Range | ≥1000 m |
| Thermal Identification Range | ≥800 m |
| Intelligent Analysis Computing | 4T |
| Functions | Hotspot alarm, intrusion detection, automatic tracking, target classification |
| Interfaces | RJ45, ONVIF, RTSP, GB/T 28181 |
| Power Supply | DC 24 V ±10% |
| Average Power Consumption | 150 W |
| Peak Power Consumption | 350 W |
| Weight | 42 kg |
Thermal tracking and identification distances are specified for a 0.3 m × 0.3 m UAV target.
3. Laser Neutralization Module
| Parameter | Specification |
|---|---|
| Effective Damage Distance | ≥600 m |
| Damage Time | Less than 10 seconds |
| Target Identification Accuracy | Greater than 95% |
| Tracking Accuracy | Less than 15 μrad RMS |
| Continuous Emission Time | Greater than 120 seconds |
| Horizontal Rotation Range | -160° to +160° |
| Pitch Range | -10° to +60° |
| Maximum Tracking Speed | 60°/s |
Airport airspace monitoring and drone protection
Critical infrastructure protection
Industrial facility and perimeter surveillance
High-value site protection
Restricted-area aerial monitoring
Integrated security monitoring projects
Multiple detection technologies for comprehensive aerial awareness.
Radar and EO/IR linkage for target tracking and visual confirmation.
Flexible system configurations for different site requirements.
Integrated detection, identification, tracking, and response functions.
Modular architecture for project-based integration.
We provide project-oriented customization and integration services according to customer requirements, including system configuration, equipment integration, communication interfaces, installation solutions, and command-and-control system adaptation.
Q1: What is the difference between System-I and System-II?
System-I integrates Ku-band radar, RF detection, EO/IR surveillance, deception jamming, and a 5 kW laser module. System-II uses X-band radar, EO/IR surveillance, and a laser module with a specified effective damage distance of at least 600 m.
Q2: Does the system support 360° monitoring?
Yes. Both configurations provide 360° azimuth surveillance capabilities through their respective detection and monitoring modules.
Q3: Can the system be customized for different sites?
Yes. System configuration, equipment integration, installation arrangements, and interfaces can be adapted to project requirements.
Q4: What environments are suitable for this system?
It is designed for applications such as airports, critical infrastructure, industrial facilities, and other sites requiring aerial monitoring and protection.
Looking for an integrated anti-UAV solution for your facility or security project?
Contact us to discuss your detection range, site conditions, system configuration, and customization requirements. Our team can provide product information and project-based technical support.
ÉTIQUETTES :